FM-408 FenceMaster PVC Vinyl Picket Fence Don Gida, Lambu, Bayan gida

Shigarwa

Lokacin shigar da shinge, sau da yawa ana cin karo da shi a cikin wani wuri mai gangare.Anan, mun tattauna abin da za mu yi a cikin wannan yanayin da abin da mafita FenceMaster ke bayarwa ga abokan cinikinmu.

Shigar da shinge na PVC a kan wani wuri mai zurfi na iya zama ƙalubale, amma tabbas yana yiwuwa.Ga cikakken matakan da muke ba da shawarar bi:

Ƙayyade gangaren ƙasar.Kafin ka fara shigar da shinge na PVC, kana buƙatar ƙayyade matakin gangaren.Wannan zai taimake ka ka ƙayyade nawa kake buƙatar daidaita shinge don tabbatar da matakin.

Zaɓi ginshiƙan shinge daidai.Lokacin shigar da shinge a kan yanki mai raguwa, kana buƙatar amfani da shingen shinge waɗanda aka tsara don saukar da gangaren.Akwai shinge na shinge na musamman da aka yi don wannan dalili wanda ke da tsarin "mataki", inda shingen shinge zai sami babban sashi a gefe ɗaya da ƙananan sashi a ɗayan ƙarshen.

Alama layin shinge.Da zarar kuna da bangarorin shingenku, zaku iya yiwa layin shinge alama ta amfani da gungumomi da kirtani.Tabbatar kun bi gangaren ƙasa yayin da kuke yiwa layin.

Tona ramukan.Tona ramukan ga shingen shinge ta amfani da ma'aunin rami ko ma'aunin wutar lantarki.Ya kamata ramukan su yi zurfi sosai don riƙe ginshiƙan shinge da aminci kuma ya kamata su kasance mafi faɗi a ƙasa fiye da sama.

Shigar da shingen shinge.Shigar da shingen shinge a cikin ramuka, tabbatar da cewa sun kasance daidai.Idan gangaren yana da tsayi, kuna iya buƙatar yanke ginshiƙan don sa su dace da kusurwar gangaren.

Shigar da sassan shinge.Da zarar shingen shinge ya kasance a wurin, za ku iya shigar da sassan shinge.Fara daga mafi girman madaidaicin gangaren kuma ku yi ƙasa.FenceMaster yana da zaɓuɓɓuka biyu don gyara bangarori akan gidan.

Shirin A: Yi amfani da madaidaicin layin dogo na FenceMaster.Saka ginshiƙai a kan iyakar biyu na dogo, kuma gyara su zuwa ginshiƙai tare da sukurori.

Shirye-shiryen B: Ramin ramuka akan 2 "x3-1/2" buɗaɗɗen dogo a gaba, nisa tsakanin ramukan shine tsayin panel, kuma girman ramukan shine girman waje na dogo.Na gaba, haɗa panel ɗin kuma kunna 2"x3-1/2" buɗaɗɗen dogo da farko, sannan gyara layin dogo kuma a buga tare da sukurori.Lura: Don duk skru da aka fallasa, yi amfani da maɓallin dunƙulewa na FenceMaster don rufe wutsiyar dunƙule.Wannan ba kawai kyakkyawa ba ne, amma har ma mafi aminci.

Daidaita bangarorin shinge.Yayin da kake shigar da sassan shinge, ƙila za ka buƙaci daidaita su don tabbatar da cewa sun kasance daidai.Yi amfani da matakin duba jeri na kowane panel kuma daidaita maƙallan kamar yadda ake buƙata.

Ƙarshe shinge: Da zarar an yi duk shingen shinge, za ku iya ƙara duk wani abin da ya ƙare, kamar su ma'auni ko kayan ado na ado.

Shigar da shinge na PVC a kan wani yanki mai banƙyama yana buƙatar shiri mai kyau da kuma ƙarin ƙoƙari, amma tare da kayan aiki masu dacewa, da matakai, ana iya yin nasara.Lokacin da aka kammala waɗannan shigarwa, za ku iya ganin kyawawan shinge na shinge na vinyl, wanda zai kawo karin kyau da daraja ga gidan.